Largest Manufacturing Technology Community on the Web
Stay Connected:
peter9150's latest activity
-
Ppeter9150 replied to the thread rpc out to hardinge dsm-59: transformer.see print attached--has both a rectifier(bottom right) and an arc suppressor between b1 and b2-same vde-8220 as machine print -not sure...
-
-
Ppeter9150 replied to the thread rpc out to hardinge dsm-59: transformer.Talked with previous owner--never had work that he could remember--but it had been in his factory for 60 years-during dad's 'day'? who...
-
Ppeter9150 replied to the thread rpc out to hardinge dsm-59: transformer.connected without brake and all seems to run ok-forward, reverse,high and low-would still like to understand better brake connection...
-
Ppeter9150 replied to the thread rpc out to hardinge dsm-59: transformer.Because the brake solenoid may be a problem (may not be connected thru legs 1and 3) I'm thinking of simply trying the lathe without...
-
Ppeter9150 replied to the thread rpc out to hardinge dsm-59: transformer.former owner (good friend --closed business-gifted to me this lathe and a bridgeport) is even more electrical blind than myself-so can't...
-
-
Ppeter9150 replied to the thread rpc out to hardinge dsm-59: transformer.Yes Jim---to B1 and B2 wire ends that match that same way-- (not insulated nor crimped ends)at the 'black' transformer--and are probably...
-
-
Ppeter9150 replied to the thread rpc out to hardinge dsm-59: transformer.I think the sections differentiate between rough and more detail of same circuit?
-
Ppeter9150 replied to the thread rpc out to hardinge dsm-59: transformer.Thanks Jim, have tried to check continuity of 'black' transformer on 'bottom' of cabinet -but till now have only done a 'quick' look...
-
Ppeter9150 replied to the thread rpc out to hardinge dsm-59: transformer.Thanks for helping.. I have been drying out the print--was coated with oil in the lathe door 'pocket'--sending the full shot here. I...
-
-
Ppeter9150 posted the thread rpc out to hardinge dsm-59: transformer in Transformers, Phase Converters and VFD.Hi All-new to this forum and need help with final hookup of rpc to hardinge dsm-59. I've plugged rpc in question to my bridgeport...
-
