Largest Manufacturing Technology Community on the Web
Stay Connected:
MazatrolMatrix's latest activity
-
Hi! (Using Mazatrol) So I have a situation where I have to index the B axis to 45° and mill a slot perpendicular to the Z axis at B0°... -
MazatrolMatrix reacted to SteveEx30's post in the thread Why don't you use conversational programming? with
Like.
Many shops will use a highly skilled programmer to make programs with whatever CAM system for MANY machines and have kids pushing the... -
MazatrolMatrix reacted to sinha's post in the thread Explain modified flank indeed threading with Like.
Search the forum for a lot more information/explanation about G76, mainly by Bill.
-
MazatrolMatrix replied to the thread Explain modified flank indeed threading.Thanks guys!
-
MazatrolMatrix reacted to guythatbrews's post in the thread Explain modified flank indeed threading with Like.
As said, the canned cycle simply adjusts the start point. You can manually program any threading infeed you can envision using a...
-
MazatrolMatrix reacted to ManualEd's post in the thread Explain modified flank indeed threading with Like.
There is also alternating flank infeed, where it alternates the Z offset + and - so you get the same effect, but it cuts on both flanks...
-
MazatrolMatrix reacted to crossthread82's post in the thread Explain modified flank indeed threading with Like.
Yes, it's so only the leading edge of the insert "V" is cutting, this reduces cutting pressure considerably. It's equivalent to feeding...
-
MazatrolMatrix reacted to awander's post in the thread Explain modified flank indeed threading with Like.
Both Z and X start more negative each pass.
-
So I have a little difficulty visualizing what's actually happening here with a cnc machine. Is the Z starting point of the threading...
-
MazatrolMatrix replied to the thread Mazatrol Nexus - EIA - Virtual Y-Axis Interpellation?.It is the same as ViktorS says on matrix and matrix 2, unsure about nexus but it is probably the same. G13.1 is polar off Edit: Our...
-
MazatrolMatrix reacted to ViktorS's post in the thread Mazatrol Nexus - EIA - Virtual Y-Axis Interpellation? with Like.
What are you trying to do? I'm not sure what "Virtual Y axis interpolation" is? What machine? Are you trying to mill on the face of a...
-
MazatrolMatrix reacted to Isak Andersson's post in the thread Mazatrol Nexus - EIA - Virtual Y-Axis Interpellation? with Like.
That would explain it. I got confused because it wasn't in the manual. Is y-axis interpellation an option as well? I'm stuck with...
-
MazatrolMatrix reacted to noname777's post in the thread Integrex B-Axis center of rotation (E-410) with Like.
we have already all this information available. When people ask, we help them. That is why we all are here in a first place. To support...
-
MazatrolMatrix replied to the thread Integrex B-Axis center of rotation (E-410).For others it may be, I thought I'd make a guide with pictures and everything when I have the time. Along with a step 1. xx 2.xx and so...
-
MazatrolMatrix replied to the thread Integrex B-Axis center of rotation (E-410).No, it’s ok. I know how it is done. Thanks