Cleaning windows on a Haas VF3

Brad.Walker · Monday at 10:16 PM

I'm new to CNC machining and have gained access to a reasonable Haas VF3.

My first job is to really do a deep clean on the machine. And in that regard, how does one properly clean the windows on it. What type of cleaning products, brushes, etc. If I knew what type of material the window was made of, I could certain determine what type of product to use. But, I couldn't even find that one out.

So suggestions on proper window cleaning and/or a definite answer on what type of material it's made of.

Thanks.

-brad w.

mhajicek · Monday at 11:03 PM

On the glass, you can use whatever you like. Don't use ammonia based cleaners on the plastic windows.

Milland · Monday at 11:03 PM

Haas windows scratch easily, so cleaning may not do a lot for you. If you want something safe, a clean, fresh mixture of your coolant and some rags may work (although you want to hose down any stuck chips first), or you can use the cleaners meant for computer monitors, those should be safe.

jhov · Tuesday at 7:24 AM

I don't have a Haas, but when mine are bad enough, I remove my windows and wash them with Dawn dish soap and a soft rag or sponge.

SteveEx30 · Tuesday at 8:46 AM

Chances are its been cleaned improperly for years and that "haze" will not clean off.

BT Fabrication · Tuesday at 9:58 AM

Brad.Walker said:
I'm new to CNC machining and have gained access to a reasonable Haas VF3.

My first job is to really do a deep clean on the machine. And in that regard, how does one properly clean the windows on it. What type of cleaning products, brushes, etc. If I knew what type of material the window was made of, I could certain determine what type of product to use. But, I couldn't even find that one out.

So suggestions on proper window cleaning and/or a definite answer on what type of material it's made of.

Thanks.

-brad w.

Soap and water works best in a spray bottle, mostly due to that most of the mess is dried coolant on the windows that is usually water based. ive messed up a welding helmet plastic screen cover with even non ammonia glass cleaners.

Elemental_Garage · Tuesday at 11:52 AM

Can't answer from machining experience but from auto correction/detailing, we've used vinegar to clean, and can usually polish plastic windows/housings back pretty clear. Might also work to try a ceramic-based coating on the insides to help them shed water/chemicals that spot them during machining. If you do, let it cure for 24 hours before getting it wet again.

13engines · Tuesday at 12:16 PM

Plastics should generally see nothing but hot water. Do like I use to back in my motorcycle windshield days... drench a bath towel in as hot a water as you can stand and throw it on there. Water based coolants will come right off. Follow with one of those yellow microfiber rags if you want to to help dry it them off.

The hot water gets the bugs off too. That is if your mill has any bug stains. :-)

Search

Largest Manufacturing Technology Community on the Web

Search

Cleaning windows on a Haas VF3

Brad.Walker

Plastic

mhajicek

Titanium

Milland

Diamond

jhov

Aluminum

SteveEx30

Hot Rolled

BT Fabrication

Stainless

Elemental_Garage

Plastic

13engines

Stainless

Similar threads