What's new
What's new

Free CNC resources

sinha

Stainless
Joined
Sep 25, 2010
Location
india

sinha

Stainless
Joined
Sep 25, 2010
Location
india
If you purchase the paperback, it will be in the regular book format, and convenient to use. Of course, amazon will not offer a free paperback because printing costs are involved.
 

sinha

Stainless
Joined
Sep 25, 2010
Location
india
Two of my eBooks are free today and tomorrow. Download if interested:
1. CNC Programming Skills: Live Tool Drilling Cycles on a Fanuc Lathe, Sinha, S. K., eBook - Amazon.com (On live-tool drilling cycles)
2. CNC PROGRAMMING: FANUC CONTROL, Sinha, SK, eBook - Amazon.com (on basic CNC programming for beginners)

Some more eBooks will be available for free for a short period during coming weeks.
I will keep you informed.

The free offer on the Live-tool book ends now.
It is still available for the second book for the next 24 hours.
 

maguilera

Plastic
Joined
Jan 4, 2022
Thanks for providing such a valuable resource of knowledge for free.

Cheers from Brazil
 

sinha

Stainless
Joined
Sep 25, 2010
Location
india
Free offer is active now. Download if interested.
Can be read on any kindle device or a smart phone with the amazon kindle app installed on it.
The app is free in google play store. Can also be installed from the amazon site.
 

sinha

Stainless
Joined
Sep 25, 2010
Location
india
One day is gone. Four more days are left for free download.

Please do read it. You will not get so much information about threading at any single place, including the Smid book.

Please note that the description is based on Model C. In other models, certain minor differences can be observed. These, however, will generally not affect the construction of the program.
For example, in Model C, the tool reaches the feed-start point in two linear moves (as shown in my book). But, it is a single linear move in Model D.

Copied from a Fanuc manual:
Approach to feed-start point.jpg

The programmer does not have to worry about such differences.

Likewise, I have not talked about E-word in G76.
E-word in G76.jpg

There will always be a few things which you will not find in any book, and learn yourself.
Experience counts!
 

sinha

Stainless
Joined
Sep 25, 2010
Location
india
The next free-download offer starts on Thursday, May 5, 2022, 12:00 AM PDT. Will continue for five days.
The offer is on CNC Programming Skills: Understanding G71 and G72 on a Fanuc Lathe, Sinha, S. K., eBook - Amazon.com
The description is an updated version of what is described in CNC PROGRAMMING: FANUC CONTROL, Sinha, SK, eBook - Amazon.com

Most of you know how to use G71 for machining from right to left. However, some of you might not be knowing how to use it for machining from left to right. For example, let us assume that we have a blank shape, as shown in the figure, obtained by casting or whatever. This is required to be machined to obtain the desired shape shown in the figure, by removing the shaded material.
Fig. 4.jpg
If you are not too sure how to do it, please read the book. This is one of the six fully-explained examples in the book.
Likewise, there can be a few more things which some of you might not be knowing, and which may not find a mention in some of the most popular books.

Of course, the book is free, for a limited period.
 

sinha

Stainless
Joined
Sep 25, 2010
Location
india
What is the disadvantage of using G01, rather than G00, in the P-block of G71/G72/G73, specially in case of G73?

Read the book for the answer to this as well as several less-known facts.

It is still free.
 








 
Top