Bobw

Zayy_12345 · Jul 26, 2018

Hello Bob,
I own a small shop and we are looking to get In to government contract. Any advise ? Where do you find contracts ? Any websites you recommend ?
Hope you can help

Atomkinder · Feb 4, 2013

Hi Bob,

Noticed your Fadal knowledge in a recent thread, and I'm new to the machine I'm using right now (well, still new to machining frankly, too), a VMC15 from 1997, and was wondering if you knew a way that I didn't have to touch off every tool? It gets sort of time consuming when I'm using 10-12 for a part. It seems to me as if the machine doesn't actually offset the spindle using the tool length, but instead offsets the spindle from the part itself, instead. Any advice would be greatly appreciated.

-Neal

andrewkeisler · Apr 25, 2012

Hey Bob,
I'm getting confused when people talk to be about this because some of the fadal part suppliers call both the keyboard and the keyboard interface a keyboard. Some will also throw in keypad as the part with the keys on it and then the keyboard for the eletronic interface board. I'm assuming you replaced the keyboard interface first and it didn't fix the problem so you replaced the keyboard (with the keys on it).

Sorry I'm a idiot haha! Just want to make sure I get the same part you did to fix it.

eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices

Right part?

Thanks, Andrew

legendsundar · Mar 29, 2012

Respected sir,

This is Sundar Sivam S.P from india living in a state called Tamilnadu/chennai. Presently i'm working in SRM international univ as a Asst prof and also doing my research work in Dry machining in light weight materials. could u do me favour for me . i need some information reg Dry machining how the process and control parameters and also experimental setup also. i'm expecting in ur favorable response from you. thank u .

legendsundar · Mar 29, 2012

Respected sir,

This is Sundar Sivam S.P from india living in a state called Tamilnadu/chennai. Presently i'm working in SRM international univ as a Asst prof and also doing my research work in Dry machining in light weight materials. could u do me favour for me . i need some information reg Dry machining how the process and control parameters and also experimental setup also. i'm expecting in ur favorable response from you. thank u .

shaffin · Jul 22, 2011

Hello Bob,

I was told that you ma be able to help me. I have thread that I have started to get an opinion of which machine to purchase at HELP - Torn between machines! - Practical Machinist - Largest Manufacturing Technology Forum on the Web

One of the machines is a 1998 Fadal VMC15, the model number is 914-15. I would like your opinion on this machine and whether it worth a buy at $14k. The machine has been sitting in a warehouse for about 2 years and is not plugged in but the owner swears that its working. Can you give me some of your thoughts or even the other two contenders:

- 1985 Kitamura MyCenter-4

- 1999 Bridgeport VMC1000/22

Any help much appreciated.

Thanks,
Shaffin.

G-Auto · Mar 2, 2011

Bob,
How much for all of the 9x11x2 Al plates shipped to PA zip 19403? thanks
Bill
[email protected]

Air1nemfg@sbcglo · Jun 28, 2010

Thanks Bob, I did try that already, with same results, My other machine faces it like glass using same program. But I do appreciate your input, Thanks.

rjtoolne · Feb 15, 2010

R & J Tool currently has an inventory of sharpened Iscar ADKT1505 and APKT1003 inserts for under $5.00 per insert. We also sharpen every other style insert. randjtool.com [email protected]

rjtoolne · Feb 15, 2010

R & J Tool currently has an inventory of sharpened Iscar ADKT1505 and APKT1003 inserts for under $5.00 per insert. We also sharpen every other style insert. randjtool.com [email protected]

Search

Largest Manufacturing Technology Community on the Web

Search

Bobw

Find content

Profile posts Latest activity Postings About

Zayy_12345

Atomkinder

andrewkeisler

legendsundar

legendsundar

shaffin

G-Auto

[email protected]

rjtoolne

rjtoolne