What's new
What's new
By:
Advanced search…

New profile posts

What's new New posts New media New media comments New resources New profile posts Latest activity
S
Dear Sir
Hullo
I am very happy to find a person experience on atomic hydrogen welding,
I am attracted to this welding and want to make its equipment,
so I need your guidance and help,
my email is: [email protected]

or in this site ,
can I ask you my questions?
waiting your reply,
best regards
Sina Faramarzi
S
Dear Sir
Hullo
I am really happy to find a person have atomic hydrogen welder,
I decided to make one of them, when I watched its films on YouTube and it attracted me, and don't allow me to sleep nights,
I need some pics of this welder to can re-build one,
can you please help me?
My email: [email protected]
S
SinaF
or any contact way you prefer ,
if you kindly answer me, I will be so thankful,
Waiting your reply,
Sincerely,
Sina Faramarzi
S
Dear Sir,
Hullo
I want to make equipments needed for atomic Hydrogen Welding,
the only person after 4 weeks of search I found who can guide and help me is you,
my request is, kindly please help and guide me to can do that,

can I have your Direct email, or cell or any other contact such as Telegram or instagram or whats app?
my email is: [email protected]
S
SinaF
some of my questions are:
1-which type and size of tungsten is better? green, red, yellow, grey? etc.. and 1mm, 1.6, 2.4 etc.. ?
2- in video on youtube "the inside of atomic hydrogen arc welding" Time 0:5':52" it show a chart necessary for welding parametrs, do you have access to this chart?
S
SinaF
3- what is maximum thickness can be welded with the 20 AMP ? i.e. I want to know current range that my welder must to have,
if all the time welding voltage is 300 volt, thus with regular 5.5 Kwat home 1 phase electricity I will gain max 18-20 apm,
4- is your transformer 3 phase or 1 phase?
5- can you please take some pics of it?
R
Tony,
You really do great work!
I have been proof reading some articles written by others, and a couple I have written, and, I hate to say it, but the last paragraph in your latest Hendey article, you wrote "come" head instead of cone.
I have probably made more errors in just this note to you, but you might want to correct that for the sake of clarity!

Thansk!
Mike
T
tonylathes
Thank you, I'll correct it. I must stop writing things at 2 am!
M
Good evening
I am just going through some old posts and saw yours about a Myford grinder from 2010. If you still have this machine, I have an information brochure and price lists for the machine. Yours for the cost of postage.
email me on
[email protected]

Gary
C
I've worked for over 50 yrs from Apprenticeship, Machinist, Tool & Die work in the San Fran. Bay area. Many shops and enjoying the work.
Texasbowhunter
Ken
Im interested on the chuck...I'm trying to figue out what to barder with to help with the offset of cost...Does it come with a backing plate that is L-00? Thanks for the offer Paul
By the way I'll be in the Columbus area in a few weeks and if we can get this worked out perhaps we can meet up and make the exchange
4GSR
4GSR
The L-00 mount is built into the chuck. Not removable. if you have a email address, send and I'll get some pictures taken of the chuck and send. BTY- I'm a pretty good ways from Columbus from my place down here in Victoria. But you never know, may drive up anyways. my email address is [email protected]. Ken
Texasbowhunter
Texasbowhunter
[email protected]...Thxs
I would like to speak to you to get an idea of what we might be able to barder for along with some coin in your purse...would this work for you? Paul
Hobbies, interests. etc
S
Don, that query is not meaningless. I need the answer in order to source these things. Just because you have no idea what they are does not mean others do not as well.
Steve
M
I think I may have told you to stop being an ass. Didnt mean to send to you. You are just an observer here.
G
Agie elox mondo 20 with futura 4 is Showing { [E39] the Y dmd-07 has detected a problem in the switching transistors (stato=B7H)} wont use fast movement in y axis. Will use slow movement in y-axis but then shows error 39 when you try to run the opposite direction. Have changed motor, encoder, and board same result.
J
jdd
So, if you are sure motor and encoder are good as well as DMD07 board then, it could
be the brake on the axis is not fully disengaging. The brake is not necessary on the Y axis.
It is on the Z. You can remove to test. Also, I have seen the pulley on the motor and the pulley
on the transition gearing of the motor assembly become loose. These pulleys are only glued
to shafts.
G
gda2
So I narrowed it down to the encoder and have ordered a new one with the same part number (LDA-196-1000) but it come in with a shielded 5 wire instead of a shielded 8 wire harness. ??? It is lacking Anot, Bnot, and Znot.
J
jdd
not sure where you ordered this from but it should have 8 wires, it does have a,b, and znot
F
Hello Bob
I saw your machine on the forum
Fanuc Series E Wire EDM .
I have such a machine can not find documents
and most importantly introductory codes.
I would be very grateful for help if
there is a possibility .
Please let me know Regards Oleg
Fanuc Tape Cut E 1979 № C-907198

ABOUT PRACTICAL MACHINIST

With more than 10.6 million unique visitors over the last year, Practical Machinist is the most visited site for metalworking professionals. Practical Machinist is the easiest way to learn new techniques, get answers quickly and discuss common challenges with your peers. Register for the world’s largest manufacturing technology forum for free today to stay in the know.

Learn more about us.

LATEST INDUSTRY NEWS

STAY CONNECTED

Facebook Instagram YouTube LinkedIn Pinterest Twitter Tiktok

Register Become a forum member. Register today.

Sign Up Sign up for our e-newsletter.

© 2021 Copyright Practicalmachinist.com. All Rights reserved.

Top