Italian wheel

English wheels get all the love---that needs to change--starting now

the little known, unheralded Italian wheel completes the leather making process

hides from Hermes, Gucci, Horween are all enhanced following a session with the Wheel---



Cilindro a gomma - Macchina per conceria: - YouTube

The tanning process has a whole slew of machines and routines that many leather workers never get involved with. All to take a goo'y animal skin and turn it into a super-dense slab of hard rawhide, then beat it up until it's the soft supple leather everyone loves.

That roller has a ridiculous surface finish. One scratch and your employment status is history.

The most we've ever done in that side of the leather industry has building a "boarding machine." It had two rubber roller that turned the same direction so you would put a hide of stiff leather folded in half between them and they would roll it over itself to soften it up. Small machine though with 4" wide rolls and a 1 HP motor. Nothing as large as the OP's.

Studying different tanning processes I especially remember plant tanning. Firstly, because the result is a hypoallergenic product, and secondly, this insole absorbs moisture released by the feet faster and more hygienic. In addition, the skin of plant tanning can be treated with oils and waxes in order to give it moisture resistance.

I forgot to add that usually at the end of the tanning process, the skin is thoroughly washed and dried and then subjected to final treatment with special oils and fatty impregnations, which are natural preservatives for any natural skin. This is how the vegetable tanned leather ends up on the shelves of stores and in the hands of tanning masters.

Not sure if Ben's trying to sell us something (down, DD! Down boy!), but I'll mention that the old-fashioned tanning methods left a lot to be desired. And a lot (of pollution) to be undesired!

A town in Massachusetts that I used to work in, Woburn, was "famous" for contamination of the land and waters due to tanneries that were located there in the 1800's and later. Leather Tanning in Woburn

There were several class actions lawsuits over harm to area children and property values, one court case even inspired a "based on fact" movie: A Civil Action (film) - Wikipedia

So I'm very glad there are much safer alternatives for producing consumer-grade leather. Now we just have to make plant-based cows and pigs so we can start with their hides...

[Yes, through some tortured logic one could claim that cows and pigs ARE plant based. It's why I justify loving bacon.]

I used overhead wheels, one-man operation, I could stretch, form, 4 6m plates a day, capacity of my wheels 1800mm deep
there's no limit to the length, but the width is governed by the shape of the boat
the plate is fed through the wheels starting from the vertical centre of the plate, stretching you use a diamond long triangulating pattern, staying away from the edges when there is enough Banana in the plate, then I change to the vee forming wheel, I did 100s in my timer

more

here is a small wheels, at present I'm building a totally hydraulic set, this was in the day before cad,you can see the wide TOP RUN plates, as the shape becomes tighter the plates are narrowed and tapered
8mm steel in the previous machine here, is 6mm 5083

ben_john7 said:

I forgot to add that usually at the end of the tanning process, the skin is thoroughly washed and dried and then subjected to final treatment with special oils and fatty impregnations, which are natural preservatives for any natural skin. This is how the vegetable tanned leather ends up on the shelves of stores and in the hands of tanning masters.

Click to expand...

"it puts the lotion on its skin or else it gets the hose again" Kind of sick but it fits the post....