RFQ - 6 part numbers - 1000 Each - 316ss - smallish turning/milling

Kingbob said:

Also just a fyi, we typically make these inhouse but we don't really deal in these quantities. The other parts are for a 1" bore and a 1/2" shaft and a 7/8" bore and 3/8" shaft. Currently we are quoting a job that these would fit into so we need quotes to quote if you follow my meaning, thanks for looking.

Click to expand...

Kingbob said:

I need 1000 of each of these parts. (6000 total parts) I have only attached 2 drawings, these are the largest of this rfq. The other parts I need are the same thing just smaller. I'll provide tolerances in detail but for quoting these are pretty wide open, the attached fit into a 1.375" bore and guide a .75" shaft. Totally non mission critical parts, if they fit they ship if you know what I mean. We can provide material if you like and will happily buy an extra 20 or 30 if there is any overrun as long as we get the full 1000 of each. The hole is just to allow grease into the groove in the packing follower, nothing critical going on in there.

Click to expand...

Kingbob said:

If you would, email me and I'll see what I can do for you.

Click to expand...