Bridgeport series 2 R2C3 parts needed

Nicholas Bove · Jul 22, 2022

Just acquired a series 2 R2C3 Bridgeport cnc with the original Heidenhain TNC145 controller on it.
I'm in need of a few parts for it. The main cabinet door, the control panel rear cover, the 2 plastic side covers on the head/arm, and the cover that houses the solenoid valves for the air brake.
Any help with this and future problems getting this up and running are greatly appreciated!

gustafson · Jul 27, 2022

Pretty sure the ram covers are the same on all the rigid ram CNC iron pretty much
Interacts are much more common, same machine but made in England

Winston1352 · Oct 20, 2022

gustafson said:
Pretty sure the ram covers are the same on all the rigid ram CNC iron pretty much
Interacts are much more common, same machine but made in England

I have many electrical parts for an R2C3 machine with the hidenhain TNC 145 control.
I have the 145 control with monitor., Bosch motor amplifiers, power supplies, axis motors, and other stuff if you have interest. I put a Centroid rectrofit on the machine.
Charles

Winston1352 · Oct 21, 2022

Nicholas Bove said:
Just acquired a series 2 R2C3 Bridgeport cnc with the original Heidenhain TNC145 controller on it.
I'm in need of a few parts for it. The main cabinet door, the control panel rear cover, the 2 plastic side covers on the head/arm, and the cover that houses the solenoid valves for the air brake.
Any help with this and future problems getting this up and running are greatly appreciated!

I have an R2C3 that I removed all the Bridgeport attire and installed a Centroid retrofit on it. I could not program the Hidenhain TNC 145. Control, and it even worked.
I will look and see what normal stuff I have left , although I mainly have the controller, monitor motors and power suppllies.
I re used the majority of cosmetic parts.
Will bump you back when I see what. Is left.

Dreynolds1331 · Dec 20, 2022

I have the same mill. Got mine back in July. I'm getting to strip the TNC145 off and retrofit it with Masso G3. The only thing that I will be saving is the servo motors and maybe on transformer. Will have spare parts shortly, Drive boards and control cabinet plus two 145 controls. Hit me up if ya need anything.

Search

Largest Manufacturing Technology Community on the Web

Search

Bridgeport series 2 R2C3 parts needed

Nicholas Bove

Plastic

gustafson

Diamond

Winston1352

Plastic

Winston1352

Plastic

Dreynolds1331

Plastic

Similar threads