Hi,
On Schaublin 150 belts are listed in the manual (attached page). There are 4 belts listed there, 3 of them at the spindle side (2 for the motor). I find it impossible to obtain the lower belt 32.5/13/990mm (Continental Veriflex FZ 30°). Moreover, there is a 5th belt, which is connecting the two motors on the tailstock side, which control the Rapid. I'm not sure if it is a part of the Automatic Threading Attachment on my machine. I measured it to be about 600mm (internal), width is 32mm and pitch is about 6mm - 100 teeth (it is also light in color and not the black rubber all the other belts are made of - see picture). Does anyone know:
1. Can I get a replacement belt for the motor (a more common close-size belt that will fit)?
2. What are the exact specifications and original sizes of the Rapid belt, and can it too be replaced with a more common product (maybe different teeth count)?
Thank Yoy
On Schaublin 150 belts are listed in the manual (attached page). There are 4 belts listed there, 3 of them at the spindle side (2 for the motor). I find it impossible to obtain the lower belt 32.5/13/990mm (Continental Veriflex FZ 30°). Moreover, there is a 5th belt, which is connecting the two motors on the tailstock side, which control the Rapid. I'm not sure if it is a part of the Automatic Threading Attachment on my machine. I measured it to be about 600mm (internal), width is 32mm and pitch is about 6mm - 100 teeth (it is also light in color and not the black rubber all the other belts are made of - see picture). Does anyone know:
1. Can I get a replacement belt for the motor (a more common close-size belt that will fit)?
2. What are the exact specifications and original sizes of the Rapid belt, and can it too be replaced with a more common product (maybe different teeth count)?
Thank Yoy
