Schaublin 125-CNC retrofit:

rotarySMP · Feb 21, 2021

Hi Guys,

I bought a Schaublin 125-CNC from Richardo (swiss ebay). Seems to have good mechanicals, and have done little work in it's 40 years.

I will be modernising it with a new controller.
Here is a video of my first impressions:
[video]New-to-me Lathe - Schaublin 125-CNC - YouTube[/video]

Kees · Feb 21, 2021

Just watched your video: space is always an issue, not matter how big your shop is....

I have the same machine waiting for repair and retrofit, but I don't have the time now.I have planned to use the orginal toolpost and make the lathe as compact as possible, which means removing the cabinet on the end and a new mounting position for the Z-axis motor.
I will follow your proges with lots of intrest!

rotarySMP · Feb 21, 2021

Thanks. There is a retrofit thread on the german CNCEcke.de
Peters CNCECKE

Because the base has that large Pneumatics compartment behind the eletrical cabinet, he managed to shoe horn everything in there.
I don't really mind the Z axis over hang. I have a bench next to where the Schaublin will live, so that space is free.
Mark

Botje · Feb 22, 2021

Watched the vid (subscribed!)

Really cool to see these machines retrofitted with modern control. Especially like the way you made the Maho control work with no disturbance of the complex and good original electronics of the machine. Worked a little with the same Maho and always thought it was a wonderful machine - and an awesome machine with the controls updated.
Good to see it can be done!

rotarySMP · Feb 22, 2021

Thanks. The Schaublin control is a lot older, so I feel this time the retrofit will be more of a clear out and replace.
Mark

JHOLLAND1 · Feb 22, 2021

was Schaublin configured as chucker or did it ship with tailstock?

rotarySMP · Feb 23, 2021

I am pretty sure they all delivered with a tailstock back then. The sales brochure show it as standard. Disappointing that the tailstock got separated from it.

Mark

rotarySMP · Feb 28, 2021

Before I removed the original controller, I wanted to document what it did and how it did it. There is very little information online about such old CNC electonics.
This controller is powered by a pre-DOS generation Data General Nova 2/4.

Unfortunately, I have no troubleshooting information about the controller or the Nova. You would need additional test equipment to interface with the nova to interogate it.

I won't dump it, but will remove the Nova with it's Schaublin controller cards, and see that it gets to a museum or collector.
Mark

rotarySMP · Mar 7, 2021

Well I think I have now reached the point of no return on this project...

Mark

SIP6A · Mar 7, 2021

If you had decide to go with the original controller, do you think you could have gotten in running in a reasonable amount of time for a reasonable amount of money?

rotarySMP · Mar 8, 2021

I doubt it. I cover that in this video. Without any way of communicating with the Mini Computor (it is pre-DOS) to interogate it, and without any schematics or information on the 13 Schaublin boards which integrate it, I do not have the skills to get that controller running. It is a Museum or collectors piece.
Mark

Kees · Mar 8, 2021

I know a workshop that bought such a machine new, they found out the controller was full of troubles . Like doing moves or toolchanges that were not programmed. That is why most of these machines have seen little use.

rotarySMP · Mar 9, 2021

Thanks for that feedback. It doesn't really surprise me to hear that. There are a lot of huge very flexibly circuit boards and spade connectors. I imagine if the gremlins get in you will have a hard time getting them out. Do you have any idea what they paid for it?
Mark

Kees · Mar 11, 2021

rotarySMP said:
Do you have any idea what they paid for it?

No, too long ago, no one remembers.

Have you seen this one: Bienvenue chez H. Stoller spécialiste retrofitte, revision et automatisation

rotarySMP · Mar 14, 2021

I hadn't seen that. I will contact them and ask if there are interested in any of the parts I have removed.
Mark

rotarySMP · Mar 14, 2021

I need to break this down a bit further than I initially hoped, as the oil cutting oil has hardened to varnish everything together...

Mark

rotarySMP · Mar 21, 2021

I really need to disassemble further than I wanted..

rotarySMP · Mar 28, 2021

This weeks update...

rotarySMP · Apr 4, 2021

Looks like I have run out of excuses for procrastination on the workshop Tetris.

alcro1998 · Apr 5, 2021

I really enjoy the videos! Pretty nice machine! I really like the Boley you have as well. Finding a Boley or Schaublin in the US seems to be very difficult.

Schaublin 125-CNC retrofit:

Cast Iron

Hot Rolled

Cast Iron

Aluminum

Cast Iron

Titanium

Cast Iron

Cast Iron

Cast Iron

Titanium

Cast Iron

Hot Rolled

Cast Iron

Hot Rolled

Cast Iron

Cast Iron

Cast Iron

Cast Iron

Cast Iron

Cast Iron

Similar threads