C axis milling

jacobsiebold said:

I am trying to mill flats on a round bar. No matter what I change in the X in the program it wants to mill on center. The only way to get it to work, is to change the Tool comp on the X and Z to half the flat width. I would like to be able to put the correct cutter comp in and have it come out. My code is below, TIA

(3/4 ENDMILL) T080808
NAT08
N0900 M110
N0902 G94 M146 M15 M08
N0903 Z0.55 T080808 SB=1500
N0904 X.6
N0905 G17
N0906 C0 G41 M13
N0907 G01 Z-2.16 F110.2 M147
N0908 G101 X.368 F6.52 M146
N0909 C180
N0910 X.6
N0911 G00 Z0.55 M147
N0912 G40
N0913 M146
N0914 G41
N0915 G01 Z-2.16 F110.2 M147
N0916 G101 X.368 F6.52 M146
N0917 C0
N0918 X.6
N0919 G00 Z0.55 M147
N0920 G40
N0921 M146

Click to expand...