Fusion 640T freezing up

G'day all,

I have a multiplex 6100y with Fusion control that freezes up. It has a new hard drive and when first fitted booted to windows and then on to Fusion no problems. I then went to load the parameters from rom or ram whichever one they are stored in. Got the message all done and ok. Power down then on again. Boots to windows then starts the fusion screen but just hangs there. Have reinitialized a few times and got it to go to fusion once. Loaded the parameters that i could by hand (couldn't get to hd2 parameters). Power down and back on. Boots to windows and then starts fusion and freezes again. Have tried reinstalling the Fusion software a couple of times from the backup but still the same. Any ideas?

Thanks in advance

I cannot say what your cause in freezing may be, but my 640t controlled 250MS will freeze occasionally, but it isn't directly freezing the control. Today I was trying to restart a program, and when I hit the restart button I lost control of all the soft key functions, but I could still jog the machine around. I ended up moving the cursor down over the keys on the bottom and clicked, and regained function of the soft keys. Kind of annoying but these are older controls so.

Mine is a different. It freezes on the fusion screen and does nothing