Greg-Nuspel
Plastic
- Joined
- Nov 7, 2022
I just had a N2-5XA transferred to our shop from one of our other facilities and I'm looking at the post output that we have for Mastercam.
G00 G90 G17 G21 G40 G69 G80
G91 G28 Z0.
G28 X0. Y0.
M13 M11 (A-AXIS UNLOCK, B-AXIS UNLOCK)
G28 A0. B0.
M12 M10 (A-AXIS LOCK, B-AXIS LOCK)
(T2 - 50 FLAT FACEMILL - H2 - D2 - DIA 50.MM)
T2
M06
G00 G90 G54
G52 X-5.284 Y61.029 Z0.
M13 M11 (A-AXIS UNLOCK, B-AXIS UNLOCK)
A-45. B270.
G68.2 X0. Y0. Z0. I225. J90. K90.
G53.1
M12 M10 (A-AXIS LOCK, B-AXIS LOCK)
I notice it does a G52 shift of the origin. I was wondering if this is normal code for the Fanuc controller or should this shift be in the G68.2 line? The machine isn't up and running yet but I thought I'd check this out will I wait.
Thanks,
Greg
G00 G90 G17 G21 G40 G69 G80
G91 G28 Z0.
G28 X0. Y0.
M13 M11 (A-AXIS UNLOCK, B-AXIS UNLOCK)
G28 A0. B0.
M12 M10 (A-AXIS LOCK, B-AXIS LOCK)
(T2 - 50 FLAT FACEMILL - H2 - D2 - DIA 50.MM)
T2
M06
G00 G90 G54
G52 X-5.284 Y61.029 Z0.
M13 M11 (A-AXIS UNLOCK, B-AXIS UNLOCK)
A-45. B270.
G68.2 X0. Y0. Z0. I225. J90. K90.
G53.1
M12 M10 (A-AXIS LOCK, B-AXIS LOCK)
I notice it does a G52 shift of the origin. I was wondering if this is normal code for the Fanuc controller or should this shift be in the G68.2 line? The machine isn't up and running yet but I thought I'd check this out will I wait.
Thanks,
Greg
