Fadal 3016 LED monitor upgrade VGA

alloyspecialties · Apr 24, 2022

I've read everything I can find and everyone seems to have a BNC connector on their Fadal. I have a 2003 with 1990-1C pendant board. It has a VGA output and I've been trying to find a wiring diagram that tells me what the outputs are, or someone that makes an adapter cable to a standard 15pin VGA to fit my LED monitor.

Has anyone successfully connected a LED monitor to the Fadal VGA output?

Bobw · Apr 25, 2022

The 1090 board is your keyboard control board, it has nothing to do with the monitor.

The monitor/video board is the 1420, it is in the side cabinet, in the card cage.
It is the middle of the 3 that are connected, on the left hand side.

There is a bigger than normal black wire coming out of it, with a bullet connector on it,
that is your video cable.. Try tracing it and see if there is an adaptor somewhere in line.

I'm going to guess that somebody hacked it to use a VGA connector.. It should be nothing more
than a simple coax cable.. You can buy a new one for $125, or you could try and un-hack it, should
be simple if you get either an RCA end, or a BNC, and chop off the 15pin.

Fadriver · Apr 26, 2022

alloyspecialties said:
I've read everything I can find and everyone seems to have a BNC connector on their Fadal. I have a 2003 with 1990-1C pendant board. It has a VGA output and I've been trying to find a wiring diagram that tells me what the outputs are, or someone that makes an adapter cable to a standard 15pin VGA to fit my LED monitor.

Has anyone successfully connected a LED monitor to the Fadal VGA output?

Real simple stuff, i did that with $25. converter and a hp computer screen
there is a post here in this forum by a canadian guy well detailed video
he makes custom knifes, nice install my crude but does the trick for $25.

Search

Largest Manufacturing Technology Community on the Web

Search

Fadal 3016 LED monitor upgrade VGA

alloyspecialties

Plastic

Bobw

Diamond

Fadriver

Aluminum

Similar threads