What's new
What's new

K.O. Lee S718 information needed

reggie_obe

Titanium
Joined
Jul 11, 2004
Location
Reddington, N.J., U.S.A.
Picked a KOLEE S718 surface grinder. I know it wasn't made yesterday, but it seemed in good condition. I need a parts diagram and list if anyone has one. KOLEE will sell me a copy of their literature for $75, but I think that is a little high since they have a guarenteed parts order in the making.
 

reggie_obe

Titanium
Joined
Jul 11, 2004
Location
Reddington, N.J., U.S.A.
Been there. "For most machines." The S718 is listed as obsolete. Call them already. As I originally stated, $75 for a parts list and whatever else they photocopy is a little high.
 

Mike Henry

Titanium
Joined
Aug 18, 2001
Location
Batavia, IL USA
I've got a KO Lee S714 grinder and from what I can tell, they never produced a manual for it. At least KO Lee can't supply one and I've never seen one on Ebay despite a year of looking fairly diligently.

I do have an old brochure that pictures both the S714 and S718 and they seem to be identical other than table travel. AIR, KO Lee does have a parts list on their web site that covers the S714 and I have a couple of pages of other info that may be of interest to you. Email me if you'd like a scanned copy in PDF format, though it may take me a few days to get to it.

BTW, so far as I know the $75 manual that KO Lee sells is primarily for their T&C grinders. The old Norton Toolroom Grinding books that sell on Ebay for $10 or so has similar info.

Mike
 

precision tools

Stainless
Joined
Jan 19, 2005
Location
Toledo, OH
For some reason, the 718 list does not download. The 714 parts list does, as do the parts lists for the 618,714 & 718 hydraulic machines. They apparently are the same family, and probably share common parts. Better than nothing.
 

reggie_obe

Titanium
Joined
Jul 11, 2004
Location
Reddington, N.J., U.S.A.
I had been to the KOLEE site several times before looking for information. I was never able to access the S714 or S718 parts list, always received a "page not found". Went back to the KOLEE site today. Tried to access the S718 parts list received the same result. I was able to access the S714 parts list. I have emailed them about this problem.

Thanks everyone.
 

Holescreek

Titanium
Joined
Aug 27, 2004
Location
Centerville,OH
reggie_obe,

K.O. Lee sent me a parts diagram in the mail 2 days ago for a 718. It took repeated emails to every address they have before I got it in the mail. They didn't even respond to any of the emails. :mad:
The diagram looks suspicously like every other diagram on their site. There is no information related specifically to the 718 other than the cover page.

I would like to get some care and maintenance information for the grinder myself.

I work 2nd shift and will take the pages in to work tonight to scan. I will email them to you tonight if at all possible. My serial number is 148000, I suspect it was made in the mid to late seventies.
-Mike
 

Dave A

Titanium
Joined
Jan 4, 2005
Location
Roseville, CA
It's interesting to see which mfg's support their legacy machines and which would rather not be bothered. I suppose it has to do with whether they still have parts to sell, or even want to. I seem to remember that by law a mfg, or importer had to supply parts and service for seven years after a model was discontinued.
 

Holescreek

Titanium
Joined
Aug 27, 2004
Location
Centerville,OH
Reggie_obe,

I emailed the manual in PDF format to the address you supplied to the board. It is only 8 pages long.

In case you need belts, the guy I bought my grinder from said he got them from NAPA for $40 less than K.O.Lee.
:eek: :eek:
-Mike
 

Haystack2.0

Plastic
Joined
Dec 31, 2022
Location
Wichita Falls, Texas
Are any of y’all still active? Have a KO Lee S718 and having some finish problems. Machine is flat and level, spindle runout is negligible. I believe my belt had a bad spot in it that is transferring through the spindle to the wheel to the part. Any help is appreciated!
 

4GSR

Diamond
Joined
Jan 25, 2005
Location
Victoria, Texas, USA
You need to start a new thread instead of digging up one from 2005 almost 20 years ago!!!
Also put you location under your aviator.
Oh, start it under the "Abrasive Machining" forum much quicker results posted there..
 








 
Top