Trboatworks
Diamond
- Joined
- Oct 23, 2010
- Location
- Maryland- USA
This mic head with the threads on anvil instead of in the barrel.
Is this a custom or an off the shelf part?
Is this a custom or an off the shelf part?
Last edited:
Largest Manufacturing Technology Community on the Web
Stay Connected:
Is this a standard mic head I can buy somewhere or a custom?
- Thread starter Trboatworks
- Start date
- Replies 4
- Views 503
A Uniquetek micrometer adjuster for a powder slide bar? I’ve never taken the one I have apart but the end where the anvil usually resides is tapped and a small shcs and nylon thrust washer holds the threaded end on. The other end is standard micrometer.
Trboatworks
Diamond
- Joined
- Oct 23, 2010
- Location
- Maryland- USA
Yep- you have a good eye.
I am in the process of making a couple for a Star.
I have a bunch of small Starrett and Mit mic heads which are threaded in the barrel.
I am just wondering on the simplest way to dodge this together with what I have..
That Star slide is a ‘OO’ which is .310” thick.
The anvil on the Starrett mic head is of course .200” so working out getting a powder ram in there with the attachment to the micrometer is just a bit tight.
May I ask-
What is the anvil diameter on that Uniquetek mic.
It must be smaller then .200”??
Last edited:
Trboatworks
Diamond
- Joined
- Oct 23, 2010
- Location
- Maryland- USA
So I was able to toss this together with the Starrett.
Similar threads
