What's new
What's new
By:
Advanced search…

Search results

  1. F

    What type of foundation and floor for tension fabric building?

    My shop is currently cluttered with items unrelated to it's intended purpose of making parts. It has become an annoyance that must be rectified soon. To do this, I bought a 40ft connex box and filled it with shelves and akro bins for organized storage of 'shelf-able' items. For larger items...
  2. F

    WTS: Anilam Crusader M manuals, schematics and parts.

    Cleaning shop, I haven't had a crusader control for a few years and I don't plan on getting another. It's time for this stuff to find a new home. $200 + shipping for everything. If I find more crusader stuff around the shop, you'll get those parts too. - Complete D/A and CPU wiring harnesses...
  3. F

    Interesting CNC mill, was it built on a Deckel?

    I came across this machine browsing the Last chance section on HGR's site. It is an Italian built machine marketed for machining carbon for edms (I think). https://hgrinc.com/productDetail/CNC/Used-Isper-Isper-F2v-CNC-Vertical-Mill/12211280073/ The F2V is shown at the bottom of the page here...
  4. F

    RFQ - easy wire EDM job, 400 pcs.

    MUST BE LOCATED WITHIN THE UNITED STATES. I cannot post a drawing for this part. I do have a SW part file that I will email to anyone interested in quoting the work. (I can do other file types tomorrow) Anyone interested, please PM me with your email address and company info. For now...
  5. F

    Would lengthy blackouts create new manufacturing opportunities?

    https://mobile.twitter.com/i/events/1528636408113397761 According to Bloomberg, Deadly blackouts due to climate change, pandemic and war? Or deadly blackouts due to the response of fake climate change, over dramatized pandemic and war? Whichever side one might choose to take, the result...
  6. F

    Phase Perfect: voltage doubling w/o a transformer?

    Phase technologies now has a line of phase converters that will turn 240v single phase into 480v 3 phase. They claim it can still run 240v 3 phase loads as well, just not simultaneously with 480v loads. What sort of voodoo magic is going on here? Does anyone here have one of these units...
  7. F

    WTS: Cincinnati Arrow 500 spare parts.

    I have a collection of Cincinnati Arrow 500 parts for sale. Please contact me through pm if you're interested, thank you. Everything was pulled from a fully functional machine. All of the boards are very clean - no jumpers or layers of unfiltered goo on anything. I figured pricing for...
  8. F

    WTB: VMC or cnc mill

    My little one man shop is growing and I am in need of a few more mills. I've been running prototype work on a Clausing Kondia fv1 cnc knee mill and farming out production jobs all year, it's time to finally bring that work in house. I could really use two 3 axis vmc's but I can make do with...
  9. F

    Dynapath cnc MCP complete w/cabinet, console & servo amps *NE OHIO*

    Everything except motors, encoders, limit switches and spindle drive. $2000... will also consider trade of other machine shop or gunsmith related tooling and equipment . Pick up is preferred, but shipping can be arranged at buyers expense. Send P.M. if you're interested. Located 20 min east...
  10. F

    RFQ: 2 easy cnc lathe jobs, 60 pcs each.

    The site will not allow me to add attachments from my phone. I have added drop box links to a basic pdf view of each piece for general reference. Dropbox - FMW125.pdf - Simplify your life Dropbox - FMW225.pdf - Simplify your life FMW125 (this is a section view): -Overall length is roughly...
  11. F

    WTB: Erickson R8 to QC30 adapter (or QC 30 spindle)

    I recently purchased a Clausing Kondia FV1-CNC mill to replace an old Millport that was worn beyond it's useful life. The problem is that the Clausing has an R8 spindle but all of my tooling is QC30/nmtb30. I have tried to swap the spindles between the two machines but they are just different...
  12. F

    WTS/WTT Narex brand R8 to SPI #3 quick change adapter w/holder

    I bought this on eBay and the seller didn't know what it was. Based on his pictures I assumed it was an R8 to NMTB30 style quick change adapter similar to the Erickson QC. Well, I lost that gamble. This adapter is designed to use the SPI 30 taper quick change tooling of which I have none. The...

ABOUT PRACTICAL MACHINIST

With more than 10.6 million unique visitors over the last year, Practical Machinist is the most visited site for metalworking professionals. Practical Machinist is the easiest way to learn new techniques, get answers quickly and discuss common challenges with your peers. Register for the world’s largest manufacturing technology forum for free today to stay in the know.

Learn more about us.

LATEST INDUSTRY NEWS

STAY CONNECTED

Facebook Instagram YouTube LinkedIn Pinterest Twitter Tiktok

Register Become a forum member. Register today.

Sign Up Sign up for our e-newsletter.

© 2021 Copyright Practicalmachinist.com. All Rights reserved.

Top